How to Apply MuDD-DRY for Maximum Efficiency: A Step-by-Step Guide

To get the best results with MuDD-DRY, it's not just about pouring and mixing. Following a few critical steps will help you use less reagent, save time, and achieve optimal solidification.

1. Know Your Mud Weight and Volume

Understanding the specific gravity of your mud helps determine how much reagent you actually need. Don’t guess—measure.

2. Start Small and Scale Up

Begin by overdosing a small volume. Let it sit for at least 15 minutes. You’ll get a clear picture of how much reagent your material truly needs.

3. Add Mud to Reagent (Not the Other Way Around)

For best mixing results, layer wet material onto MuDD-DRY, not the reverse. This leads to more even distribution and quicker absorption.

4. Evaluate the Waste Stream

Highly corrosive, saline, or hydrocarbon-rich waste may require a higher dose. MuDD-DRY performs best on drill cuttings, hydro-excavation mud, and water-based semi-solids.

5. Keep It Dry

MuDD-DRY can absorb 300% of its weight—but don’t let it get rained on post-treatment. Instead, expose it to sun and wind to trigger evaporation and reduce mass.

This simple, five-step guide ensures you’re not wasting reagent or time—giving your team better results, faster.